1.产品说明：
2.本驱动板使用SIXTHHD-HD1主控IC,
本驱动板可以
支持12个以上不同的液晶屏分辨率设置，后续不断增加。。。
1，1路VGA信号输入
2，2路AV信号输入
3，1路HDMI信号输入,且本IC支持的是HDMI1.2
4，1路倒车信号输入
5，支持宽电压输入，并可以在，4.5V-18V之间正常工作，
6，支持TTL50PIN定义
7，驱动板集成液晶屏LED背光驱动板路，
8，支持40PIN -LVDS定义
9，标准按键板接口，并支持双色LED指示灯显示
10，支持TTL信号输出，
可支持
ZJ050NA-08C,EJ050NA-08C,AT070TN92,AT065TN14,AT080TN52, AT090TN12,AT090TN1,AT070TN90,AT070TN93,AT070TN94等，通用50PIN接口的TTL液晶屏,配合我公司PCB800602转接板
可以有效支持，汉彩，AUO,天马，京东方，中华等通用60PIN定义TTL接口,比如，
HSD070IDW1,A070VW04,A080SN01,A104SN01,HSD084IDW1等，
11，40PIN定义支持如下液晶屏
EJ070NA01-1024X600分辨率
EJ080NA04B-1024X768分辨率
ZJ070NA01,型号的通用40PIN高分液晶屏
EJ101NA-01G,EJ080NA-01E,EJ080NA-04C等
12,配合PCB800100,还可以支持4。3，5，6，7寸，40PIN通用的屏，定义参见AT043TN24V,1
13,本驱动板最大输出显示分辨率为，1920X1080超过,1440X900显示分辨率时，需要视IC的工作情况，增加散热片，以降低IC的工作温度）
14本IC，支持VGA,和HDMI口升级
15，本驱动板可增加遥控功能（需要通过软件实现）
16，本驱动板可以自动检测，并显示相关的输入电压信息-----注，此功能为定制功能，需要联系我公司技术部
17，本驱动板可以支持自动检测信号开关机功能，--此功能为定制功能
18，本驱动板可以加BNC接口---需要定制
19，支持倒车控制，并显示AV2上，倒车电压支持50V以内的电压输入
20，本驱动板定位孔为四个，
21，如果特殊要求，我公司可以提供其它的定制服务
22，客户需要改程序，需要连接我公司，购买相关的程序下载板，
23，利用本公司的USB接口程序下载板，可以自行在BIN代码上添加LOGO
  2 接口功能说明
位号 功能说明 备注
RCA1 AV输入 
TP1 AV信号输入和倒车电压输入口 
J4 VGA输入 
DB15 VGA输入 
HDMI HDMI输入 HDMI标准为1.1
DCIN 电源输入 
J3 电源输入 
  
J7 LED背光座 
CON1 TTL-50PIN信号输出 
CN1 40PIN-LVDS信号输出 
J6 按键，遥控，LED指示灯接口 
CN3 液晶屏分辨率设置 2*5PIN,后续会支持15个以上，
3，VGA模式
640X480  支持
800X600 支持
1024X768 支持
1024X600 支持
1280X1024 支持
1366X768 支持
1440X900 支持
....... .......
1920X1080 支持
需要支持其它分辨率，可以后续增加
4，AV模拟
NTSC  支持
PAL 支持
5产品外观图，不带端子款式，如下图

带端子全功能款式如下

6产品尺寸图

7接口功能详细说明
7.1 ,J6 按键板，遥控器输入接口
序号 定义 说明
1 5V 遥控器供电，实为3.3V
2 GND 地
3 IR 遥控输入
4 POWER 开关机功能
5 MENU 菜单显示功能
6 + 加
7 _ 减
8 SOURCE 信号源转换
9 LED-R LED指示灯
10 LED-G LED指示灯
DB15--VGA信号输入接口
序号 定义 说明
1 D-15 标准接口
J3-DCIN 电源接口
1 +12V 正电源输入
2 +12V 正电源输入
3 GND GND
4 GND GND

HDMI 接口
1 HDMI标准接口 标准线材可用

J5,AV信号和倒车控制电源接口
1 ACC 倒车电压输入，12V输入后强制到AV2
2 AV1 AV1输入
3 GND GND
4 AV2 AV2输入
5 GND GND

J4-VGA IN
1 GND GND
2 V V
3 H H
4 GND GND
5 R R
6 GND 地
7 G G
8 GND 地
9 B B
10 GND 地
11 SDA 升级用
12 SCL 升级用
CN3定义
CN1-----LVDS屏接口
序号 定义 说明
1 A 屏参组合设计
2 B 屏参组合设计
3 2 屏参组合设计
4 3 屏参组合设计
5 4 屏参组合设计

屏参设置如下图    后续会持续增加不同的液晶屏参数，最多将会支持到50个分辨率

CON1+CN1,接口定义
 

1. Product description:
2. This driver board uses SIXTHHD-HD1 main control IC.
This driver board can
Supports more than 12 different LCD screen resolution settings, and more will be added in the future. . .
1. 1 channel VGA signal input
2. 2 AV signal inputs
3. 1 HDMI signal input, and this IC supports HDMI1.2
4. 1 channel reversing signal input
5. Supports wide voltage input and can work normally between 4.5V-18V.
6. Support TTL50PIN definition
7. The driver board integrates the LCD screen LED backlight driver board circuit.
8. Support 40PIN-LVDS definition
9. Standard keypad interface and supports dual-color LED indicator display
10. Support TTL signal output,
Can support
ZJ050NA-08C, EJ050NA-08C, AT070TN92, AT065TN14, AT080TN52, AT090TN12, AT090TN1, AT070TN90, AT070TN93, AT070TN94, etc., universal 50PIN interface TTL LCD screen, matched with our company's PCB800602 adapter board
It can effectively support Hancai, AUO, Tianma, BOE, Zhonghua and other common 60PIN defined TTL interfaces, for example,
HSD070IDW1,A070VW04,A080SN01,A104SN01,HSD084IDW1, etc.,
11. 40PIN definition supports the following LCD screens
EJ070NA01-1024X600 resolution
EJ080NA04B-1024X768 resolution
ZJ070NA01, model universal 40PIN high-resolution LCD screen
EJ101NA-01G, EJ080NA-01E, EJ080NA-04C, etc.
12. With PCB800100, it can also support 4.3, 5, 6, 7-inch, 40PIN universal screens. For definition, please refer to AT043TN24V,1
13. The maximum output display resolution of this driver board is 1920X1080. When the display resolution exceeds 1440X900, it is necessary to add a heat sink depending on the working conditions of the IC to reduce the operating temperature of the IC)
14 ICs, support VGA, and HDMI port upgrade
15. This driver board can add remote control function (needs to be realized through software)
16. This driver board can automatically detect and display relevant input voltage information ----- Note, this function is a customized function, you need to contact our company's technical department
17. This driver board can support automatic signal detection and on/off functions. This function is a customized function.
18. This driver board can add a BNC interface---needs customization
19. Supports reverse control and displays on AV2 that the reverse voltage supports voltage input within 50V.
20. This drive plate has four positioning holes.
21. If there are special requirements, our company can provide other customized services.
22. If the customer needs to change the program, he needs to contact our company and purchase the relevant program download board.
23. Using the company's USB interface program download board, you can add the LOGO to the BIN code by yourself
   2 Interface function description
Tag Function Description Remarks
RCA1 AV input
TP1 AV signal input and reverse voltage input port
J4 VGA input
DB15 VGA input
HDMI HDMI input HDMI standard is 1.1
DCIN power input
J3 power input
  
J7 LED backlight base
CON1 TTL-50PIN signal output
CN1 40PIN-LVDS signal output
J6 button, remote control, LED indicator interface
CN3 LCD screen resolution setting 2*5PIN, more than 15 will be supported in the future.
3. VGA mode
640X480 support
800X600 support
1024X768 support
1024X600 support
1280X1024 support
1366X768 support
1440X900 support
....... ........
1920X1080 support
Other resolutions need to be supported and can be added later.
4.AV simulation
NTSC support
PAL support
5 Product appearance picture, without terminals, as shown below

Full-function models with terminals are as follows:

6Product size chart

7 Detailed description of interface functions
7.1, J6 button board, remote control input interface
Serial number Definition Description
1 5V remote control power supply, actually 3.3V
2 GND Ground
3 IR remote control input
4 POWER switch function
5 MENU menu display function
6 + plus
7 _ minus
8 SOURCE signal source conversion
9 LED-R LED indicator light
10 LED-G LED indicator light
DB15--VGA signal input interface
Serial number Definition Description
1 D-15 standard interface
J3-DCIN power interface
1 +12V positive power input
2 +12V positive power input
3 GND GND
4 GND GND

HDMI interface
1 HDMI standard interface, standard cable available

J5, AV signal and reverse control power interface
1 ACC reverse voltage input, forced to AV2 after 12V input
2 AV1 AV1 input
3 GND GND
4 AV2 AV2 input
5 GND GND

J4-VGA IN
1 GND GND
2 V V
3 H H
4 GND GND
5 R R
6 GND ground
7 G G
8 GND ground
9 B B
10 GND ground
11 SDA for upgrade
12 SCL for upgrade
CN3 definition
CN1-----LVDS screen interface
Serial number Definition Description
1 A screen parameter combination design
2 B screen parameter combination design
3 2 Screen parameter combination design
4 3 Screen parameter combination design
5 4 screen parameter combination design

The screen parameter settings are as shown below. Different LCD screen parameters will continue to be added in the future, and up to 50 resolutions will be supported.

CON1+CN1, interface definition
 

8 Transportation, storage and usage requirements
1. Do not apply heavy pressure or bend deformation.
2. Anti-static and water resistant
   3. Relative humidity, less than 80%
   4. Operating temperature -1-degree--+60 degree
5. Use humidity 0-+40 degrees
6. This driver board can use remote control and key board pictures (optional)